£2.22
A Polycarbonate cable-end shell without latch for 4 x 15/45a Powerpoles. Can be used with the latched Powerpak cable shell or Snap-in bulkhead receptacle.
Powerpoles not included with shell – can be purchased here
PACK CONTENTS: 1 x shell, 1 x clamp, 2 x screws, 1 x retaining pin.
| Weight | 0.02 g |
|---|
Only logged in customers who have purchased this product may leave a review.
A useful spacer which can be used as a ‘blank’ position in a matrix of Powerpole®. The end hole can also be used to house an LED indicator or as a fixing hole for vertical mounting. Pack of five.
A useful spacer which can be used to mechanically key a matrix of Powerpole® when used in conjunction with the short spacer. Colour: Red. Pack of five.
A Polycarbonate shell which will neatly panel mount 6 x 15/45a Powerpoles. Can be used with the latched or unlatched Powerpak cable shells. Powerpoles not included with shell. PACK CONTENTS: 1 x shell, 2 x retaining pins.
The retaining pin is to prevent the seperation of 15 to 45 amp connector housings (not included). PACK CONTENTS: 10 x retaining pins, for 2 high block of 4+ connectors (not included). For securing 2 parallel connectors please order 110G16.
A Polycarbonate cable-end shell with latch for 10 x 15/45a Powerpoles. Can be used with the Snap-in bulkhead receptacle. Powerpoles not included with shell. PACK CONTENTS: 1 x shell, 1 x clamp, 2 x screws, 4 x retaining pins.
A pack of five PVC sleeves to provide protection and an ergonomic feel for two 15 to 45 amp Powerpole®. As used on golf trollies, power supplies, etc.
Reviews
There are no reviews yet.